URD’s primary market focus is Toyota family vehicles and we manufacture most of our product line for that market. We have been getting requests for our sim application for other vehicle brands and have not made a UNIVERSAL application that will work on any vehicle with a 0-1 volt rear O2 sensor.
The UNIVERSAL device can be wired into any vehicle and can be custom tuned for any application by the end user by simply adjusting potentiometers with a small screw driver to make it perfect for your particular application.
The UNIVERSAL device is a dual channel unit so it will connect to two sensors and each sensor channel has its own adjustments.
URD knows that many vehicle owners use their vehicle as a dual sport vehicle where they use it as a commuting vehicle during the week and a track vehicle on the weekends. We have made the UNIVERSAL device so that you can quickly remove it when you leave your track event and bypass it for normal legal highway operation by installing the jumper plug in its place.
The UNIVERSAL device is not legal for highway use so please remove it and use the jumper plug as needed for highway operation.
It is not practical for URD to supply vehicle specific wiring guide for all vehicles and will only ship a generic wiring guide for this device. The end user will be responsible for obtaining vehicle specific wring information. URD recommends that all connections be properly soldered and heat shrink wrapped. We have found that crimp and wire piercing splicing connectors to be very problematic and recommend they not be used. The unit is not water proof and we recommend installing it in the dash or glove box to protect it from the weather.