Cart $761.44
1
1
Subtotal: $761.44
JBA Header, Tundra 05-06, Sequoia 05-07 4.7 V8
1 × $761.44
Subtotal: $761.44

Out of stock

URD Spec-U LT Headers 2013+ FJ Cruiser & 4Runner V6

$675.00

-

Out of stock

Notify me when this product is back in stock!

URD is proud to announce our new Spec-U True Equal Length Long Tube Header for the 2013 and later FJ Cruiser and 4Runner with the 1GR-FE 4.0L V6 engine. This new version has the needed provision for the cold start air injection system.

if you have a non-USDM FJ or 4Runner and it does not have the cold start air injection system, these headers would be correct for your vehicle.

URD has been working on this new “better header” for a long time to get things just right. We have tested different tube lengths in an effort to maximize the low-end torque production without sacrificing the upper-end power gains. The equal length design also improves the sound or tone of the exhaust.

The header is designed to be compatible with the stock Y pipe, or any of the current aftermarket Y pipes.

The header is MADE IN USA and is constructed of 304 grade stainless steel mandrel bent tubing that is 1 5/8″ diameter with CNC milled mild steel flanges all hand TIG welded. The headers are ceramic coated inside and out with a very high-quality ceramic coating.

Due to the equal length design installation is slightly more involved than the other long tube header options. Installation requires disconnecting the steering shaft to allow the new header to be fitted to the engine. This is a simple process and is accomplished by removing the pinch bolt(s) in the shaft coupler and sliding it up enough to disengage it from the lower portion and then reattached once the header is bolted to the engine.

This is an off road/racing use only product.

Made in the USA
Mandrel bent tubing
304 grade stainless tubing
Length adjusted for MAXIMUM low-end torque
True EQUAL LENGTH design for MAXIMUM power
True EQUAL LENGTH design for best exhaust sound
High quality ceramic coating
1 5/8″ primary tube size
Ships with URD collector gaskets and collector hardware

Fitment

2013 and later FJ Cruiser
2013 and later 4Runner V6

Will fit RIGHT-HAND DRIVE VEHICLES

Not compatible with:

Total Chaos part number 59651 WELD-ON UPPER COIL BUCKET TOWER GUSSETS
Will not fit the Tundra with the 4.0L V6 due to the different collector flange design
Dyno Chart:

The development vehicle was a 2012 Tacoma XRunner complete stock except for the URD Spec-U headers and used a DynoJet 224xLC dyno.

Peak gain was 17 RWHP and 30 RWTQ

Max Gain was 22 RWHP at 3500 RPM and 34 RWTQ at 3430 RPM.

The most important thing to note is the Spec-U headers makes power throughout the ENTIRE RPM range. NO LOSS IN LOW-END TORQUE.

 

Year Make Model Engine
Year Make Model Engine
2013 - 2021 Toyota 4Runner V6 4.0L 1GR-FE
2013 - 2021 Toyota FJ Cruiser V6 4.0L 1GR-FE
Weight 27 lbs
Dimensions 30 × 20 × 12 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Scroll to Top